PGA970: PGA970

SARAVANAN SUNDERESAN

Part Number: PGA970

Hello, I am working with pga970. And i already got source code with it. Problem is i am finding difficult to work with source code. My main goal is to generate waveform from pga970.

I am unable to find proper procedure to work with it. I am new to this board. Please suggest any documents which will help me with the coding. I am coding with c program in ccs.

Can any one explain proper procedure to generate waveform and how my main.c should be executed .

Thank you.

over 1 year ago

0 Cole Macias over 1 year ago

TI__Mastermind 18900 points

Hi Saravanan,

Unfortunately, we cannot support firmware development questions related to the PGA9x devices. Please see this FAQ: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/802433/what-is-the-e2e-support-model-for-the-pga900-and-pga970

With that being said, between the datasheet and firmware guide, I believe there is enough documentation to understand what is needed of the generator. If I were to give you the general steps.

Configure the waveform settings
Generate the table
Write the table the appropriate space in RAM
Select number of samples and run

The GUI actually provides this context too:

I apologize that I cannot help you further.

Best,

-Cole

0 SARAVANAN SUNDERESAN over 1 year ago in reply to Cole Macias

Prodigy 80 points

sir, i can generate waveform gui. i am finding difficulty in code composer studio.

Thank you.

0 Cole Macias over 1 year ago in reply to SARAVANAN SUNDERESAN

TI__Mastermind 18900 points

Hi Saravanan,

Thanks for the confirmation. Unfortunately, you have most everything that we have to offer outside of trying to make a post to the code composer studio forum (which I recommend you do).

Best,

-Cole

Sensors

Sensors forum

PGA970: PGA970