Original question:
Hi
Can you please provide the X & Y coordinates from a hole or a reference on the TMAG5273EVM PCB to the sensor location of / or at least to the top/side of the TMAG5273 chip . We have dimensions of the PCB but not the location of this sensor on the PCB.
Regards
Alan
Hello Alan,
Thanks for posting to the sensing forum!
Dimensions from the center of the left hole to the center of the IC are X-304.724mils and Y-690.354mils. In mm this is equivalent to X- 7.73999mm and Y- 17.53499mm
The sensor is not located directly to the middle of the IC but you can use the information in the datasheet to calculate this:
Using 1.6mm and 2.9mm for the package dimensions. Middle of the package would be at 0.8mm and 1.45mm.
The sensor location is closer to the left hole reference used in our measurement above so reference to X_sensor = 7.73999-(0.8-0.68) = 7.761999mm
The sensor location is also closer to the left hole reference used in our measurement above so reference to Y_sensor = 17.53499-(1.85-1.45) = 17.13499mm
I hope this helps!
Best,
Isaac
