MMWCAS-RF-EVM: MMWCAS-RF-EVM, MMWCAS-DSP-EVM, LUA

Ambuj Agarwal

Part Number: MMWCAS-RF-EVM

Hi,

i used the MATLAB Code given in https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/923196/mmwcas-rf-evm-_idx-bin-file-format---cascade-radar-capture-with-mmwave-studio to find time stamp of frames.

my doubt is the time stamp (UNIX) recorded in idx.bin file is in seconds, milliseconds, microseconds or nano seconds?

Thanks & Regards

Ambuj

over 2 years ago

0 Kaushik Gowda over 2 years ago

TI__Mastermind 20605 points

Hi Ambuj,

I am not aware of the unit of the timestamp mentioned here. I will have to check with the cascade team for that.

Instead, if you know the frame periodicity, you should be able to find out the unit, right? Take the difference of timestamps of 2 successive frames and then obtain then match it to the frame periodicity (the order of this will give you the right unit of time). Let me know if you aren't able to proceed with this.

Regards,

Kaushik

0 Ambuj Agarwal over 2 years ago in reply to Kaushik Gowda

Intellectual 300 points

Hi kaushik,

This worked thanks.

Regards,

Ambuj

Sensors

Sensors forum

MMWCAS-RF-EVM: MMWCAS-RF-EVM, MMWCAS-DSP-EVM, LUA