This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMWCAS-RF-EVM: Cascade_Configuration_TestSource issues

Part Number: MMWCAS-RF-EVM
Other Parts Discussed in Thread: MMWCAS-DSP-EVM, AWR2243

hi 

My device is mmwcas-dsp-evm. mmwave studio version 02_01_01_00, mmwave dfp version 01_02_05_01

I followed the steps in the user guide to run the test source files "Cascade_Configuration_TestSource.lua" and the default settings in "Cascade_Capture.lua".

In the "Cascade_Configuration_TestSource.lua" script, we can know that we have two objects at 5m and two objects at 13m.

But the data I obtained is displayed as the picture below, which is not the same as the understanding of the script, how to deal with it?

At the same time, I found a previous related issue https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/993567/mmwcas-rf-evm-awr1243p-test-source-issues
It is very similar to my problem, but I don't know whether my device is AWR1243P or AWR2243, so how should I determine the specific model of my device and the corresponding version of mmwave studio and dfp?