LDC1314DIAL-EVM: How to use LDC1314DIAL-EVM as stand alone application

Sayali Shinde

Part Number: LDC1314DIAL-EVM
Other Parts Discussed in Thread: LDC1314

Hello Team,

we have tested LDC1314DIAL EVM with GUI , as we rotate the PCB ,on GUI we are getting absolute value i.e exact position in degree.

All this result we are observing with the help of GUI. In guide it is mention that we can use this kit as standalone application also, but how to operate in standalone is not mentioned anywhere.

can you provide some documents or steps where we can use this kit as standalone application and also provide information where we can observe the output . Now are able to see output on GUI but in stand alone how and where to observe the output.

It is possible to convert this absolute data into incremental format.?

Regards,

Sayali Shinde

over 2 years ago

0 John Miller - Sensing over 2 years ago

TI__Mastermind 40295 points

Sayali,

The statement about the standalone application Is with respect to porting the GUI algorithms code to a microcontroller.
We have no documentation or code to support this.

Regards,
John

0 Sayali Shinde over 2 years ago in reply to John Miller - Sensing

Intellectual 705 points

Hello Miller,

Is it possible to run LDC1314DIAL EVM without GUI, we want to developed inductive encoder by using LDC1314 chip. To understand its working its very necessary to to use EVM without GUI.

Regards,

Sayali

+1 John Miller - Sensing over 2 years ago in reply to Sayali Shinde

TI__Mastermind 40295 points

Sayali,

The only info we have to share are the algorithms described in the 1º Dial Reference Design user's guide.
The algorithms would need to be implemented in your code.

Regards,
John

Sensors

Sensors forum

LDC1314DIAL-EVM: How to use LDC1314DIAL-EVM as stand alone application