• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 408 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMWCAS-DSP-EVM: Not able to connect with the TDA board. Please check whether the Capture Card is connected to the network!

津田 和俊
Intellectual 370 points
Part Number: MMWCAS-DSP-EVM
Other Parts Discussed in Thread: MMWCAS-RF-EVM

Hello,

I have MMWCAS-RF-EVM(Rev-E) connected to MMWCAS-DSP-EVM.

I tried to follow the "mmwave_studio_cascade_user_guide.pdf", but it did not connect to the MMWCAS-DSP-EVM.

I tried to do the steps given in section 13, but it did not connect to the MMWCAS-DSP-EVM.

I also checked the thread below, but it did not connect to the MMWCAS-DSP-EVM.

e2e.ti.com/.../awr1243-not-able-to-connect-with-the-tda-board

Please advice regarding this issue.

thank you.