AWR1642BOOST: Can I use AWR1642BOOST for 'Vital Sign Labs'?

Hi Tim,

Thank you for your answer.

I'm sorry but I have more questions.

figure 1

Actually, I found this file(figure 1) that explains how to use 'Vital Sign Labs' with AWR1642.

So, I'm currently following this process.

But, when I go to 'TI Resource Explorer' for downloading CCS Project, I can't find the page like figure 2.

figure 2

I can find only this page like figure 3.

 figure 3

How can I open the 'figure 2' page?

Please answer me.

Thank you for your help.

{[summary] I want to open the CCS Project like figure 2}

Also, I can't find this part that show 'software' like figure2.

Thank you.

Thank you Tim.

Have a nice day.

Hi,

I'm sorry, but I have some questions about the 'Vital Sign Labs'.

I already completed successfully the UniFlash process(Figure1)

Figure1

And I'm in this process(Figure2)

Figure2

But, when I select start, It doesn't working. The GUI(Figure2) isn't changed and I can't see the result.

I connected DCA1000 EVM, and I do the process(Figure3)

Figure3

Please answer me.

Thank you.

Hi,

This lab shouldn't need a DCA1000 EVM. Can you make sure the device is in the right mode and switch settings are all correct? Please list them here.

Regards,

Tim

Hi Tim,

Thank you for your answer.

I have AWR1642BOOST and the picture is like Figure1,2

Figure1 / Figure2

I corrected the 'Flash Lab Binaries' and 'Run the Lab' in 'Getting Started Guide mmWave LAB Driver Vital Signs'

But I found the file 'DriverVitalSigns_DevelopersGuide' and I'm following it.

So, I think I didn't do the process(Figure3)

Figure3

There is no contents about this in 'Getting Started Guide mmWave LAB Driver Vital Signs'.

But, there are some problems.

I already downloaded the SYS/BIOS, but I received that message(Figure4).

Figure4

Please answer me.

Thank you.

Hi,

Thank you for your reply.

I have already downloaded the file(bios_6.52.00.12).(SYS/BIOS, Figure1) and I add the SYS/BIOS.

Figure1

But I have a problem. When I import CCS Project without the SYS/BIOS, I can see the right mode like Figure2

Figure2

However, After I download SYS/BIOS and refresh like Figure1, my 'import CCS Projects' changed to Figure3.

Figure3

What's the problem?

I downloaded SYS/BIOS and added path too.

I want to success this process(Figure4)

Figure4

Please answer me.

Thank you.

Hi Tim,

Thank you for your reply.

Actually, I deleted my CCS project and I restarted from the first. But when I add SYS/BIOS path, this error occurs(Figure1) and I failed....

So I think the way for 'adding SYS/BIOS path' is wrong. My way is 'Window → Preferences  → CCS → Product → bios(Refresh)'

Figure1

Pleas tell me what is wrong for me or how to do that.

And, If I click 'OK' and go to the process(Figure2) and click Rebuild Project,

Figure2

Figure3 occurs.(errors)

Figure3

Please answer me.

Thank you. Have a nice day.

Hi Tim,

Always thank you for your reply.

I'm sorry but I can't work it out.

I know that there are two ways to execute the compiled code on the EVM.

- Deployment mode

- Debug mode

I know that Deployment mode is unnecessary CCS and it is demonstrated in GettingStartedGuide.

So I restarted Deployment mode again.

I have also connected Uniflash.

I think my mistake is in SOP or Settings in GUI, but I just don't know why.

Or, maybe the distance from radar to human's body.

I always appreciate your kind reply.

Thank you.

Hi,

I want to add some problems.

Actually, I finished Uniflash like under fig.

I did gui and clicked 'Start' and prompt show that page. But my gui doesn't plot the result.

How can I solve it?

I already checked SOP power cycle.

Please answer me.

Thank you.

Hi,

Are you seeing data stream off of the device? Can you use a program like TeraTerm to see if data is being stream through? If data is coming from the device after you send the .cfg file, you should see random characters coming through TeraTerm

Hi Tim,

Thank you for your all replies and they are very helpful.

I didn't experiment properly yet, but I finally succeeded in Vital Sign Lab.

This Lab had to execute GUI in automotive toolbox 3.0.0, not 3.6.0.

So, can I save that waveform in any format? How?

And If I have that waveform, can I use it in MATLAB or Python?

Actually, I want to change that Heart waveform to ECG signal using MATLAB or Python deep-learning.

Please answer me.

Thank you always, Tim

Hi Tim,

Thank you for your reply.

Have a nice day.