• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 182 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1843BOOST: How to enable stationary object detection and tracking using IWR1843Boost(without DCA1000EVM)

V L V Vardhan
Prodigy 100 points
Part Number: IWR1843BOOST

Tool/software:

How to enable stationary object detection and tracking using IWR1843Boost in configuration(cfg) file. similar to 6843ISK, where configuration parameters such as: 

staticBoundaryBox 
boundaryBox 
sensorPosition 
gatingParam 
stateParam 
allocationParam 
maxAcceleration 
trackingCfg 
presenceBoundaryBox 
Are there any similar configuration setup for IWR1843BOOST available for stationary object detection and tracking removing the static clutter