• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 83 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMP112: TMP112

TMP112: Read temp

Naizeng Wang
Expert 5460 points
Part Number: TMP112

Tool/software:

Hi team,

Customer sends 0x60 and 0xA0 to config register, then TMP112 returns the temp value. Is this behaviour expected?

  • 0
    TI__Expert 4840 points

    Hello Naizeng,

    If the customer's intent is to perform a clean reset of the TMP112, a more effective approach would be to either power-cycle the device or initiate a General Call Reset. Either method should clear the temperature result register too.

    Regards,

    Harry