TDC7200

RESHMA CHANDRAN

Other Parts Discussed in Thread: TDC7200

Hi,

I'm doing a project using TDC7200. I want to know more about the principle of calculating TOF using the information from measurement result registers especially about CALIBRATION CYCLE and CALIBRATION1 and 2. Can anyone help me with this?

over 8 years ago

0 Bahram Mirshab over 8 years ago

TI__Expert 3350 points

Hello Reshma,

Please refer to the TDC7200 datasheet, section 8.4 "Device Functional Modes", starting on page 14 for the details.

0 RESHMA CHANDRAN over 8 years ago in reply to Bahram Mirshab

Prodigy 210 points

Hi,

Can I access the measurement result registers of TDC7200 from the TDC1000-TDC7200 EVM rather than via GUI?

0 Vishy Viswanathan over 8 years ago in reply to RESHMA CHANDRAN

TI__Mastermind 21685 points

Yes, you can. Please refer to this link for getting started instructions on the firmware

e2e.ti.com/.../520659

Sensors

Sensors forum

TDC7200