IWR1443: Question on DCA1000 EVM and mmWave Studio

user5593674

Part Number: IWR1443

hi,

I am using mmWave Studio with DCA1000 and iwr1443 and when running the Capture demo,i do this with the help of the DCA1000 Quick Start Guide.After clicking the run button,it load the BSS FW and MSS FW again, and it fails as thepicture shows.

Can anyone help me.?Thanks in advance.

Li hua

over 7 years ago

0 Michelle Liu over 7 years ago

TI__Genius 11405 points

Hi Chao,

The folder directory you showed is not the default one, it should be under C:\ti\mmwave_studio_01_00_00_00\rf_eval_firmware

Another thing is that the output window didn't scroll down to show what error message is.

Please re-install mmwave studio and use default directory as suggested. Let me know how it goes.

Thanks and Regards,
Michelle

0 user5593674 over 7 years ago in reply to Michelle Liu

Prodigy 135 points

hi Michelle,

Thank you so much!I have solved the problem caused by my repeatd loading.I find it that it works well after I click the run button without loading the folder.

Thanks and Regards

Chao

Sensors

Sensors forum

IWR1443: Question on DCA1000 EVM and mmWave Studio