PGA900EVM: firmware upload

Dimitrius

Part Number: PGA900EVM
Other Parts Discussed in Thread: PGA900, USB2ANY, UNIFLASH

Hello All.

AT mass production my customer uses CCS and PC to upload firmware into PGA900. I'm pretty sure there is more time-effective way of programming.

The method described here:

Am I right it's possible to use ANY2USB and console commands for simple firmware upload without CCS?

Best regards,

Dmitry

over 6 years ago

0 Scott Cummins over 6 years ago

TI__Mastermind 31655 points

Hi Dmitry,

Yes, that is possible calling on the USB2ANY DLL. The PGA900 specific DLL is included in the GUI download, although I don't believe the documentation is included. I will look into that and get back to you.

Regards,

0 Scott Cummins over 6 years ago in reply to Scott Cummins

TI__Mastermind 31655 points

Hi Dimitrius,

I do not currently have the documentation available for that DLL.

Has your customer looked into using Uniflash as another option for firmware upload without using the PGA900EVM GUI? It has built in support for the PGA900.

www.ti.com/.../UNIFLASH

Regards,

0 Dimitrius over 6 years ago in reply to Scott Cummins

TI__Intellectual 1315 points

Hello Scott,
The customer said they have found out solution for quick programming at mass production. So in general the questions is closed.

Best regards,
Dmitry

Sensors

Sensors forum

PGA900EVM: firmware upload