• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 491 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

IWR6843: TX beam forming

IWR6843: Decoding raw data for individual antennas when using Binary Phase Modulation (BPM) for simultaneous transmission on 2 antennas on IWR6843

Kamran Ali1
Prodigy 70 points

Part Number: IWR6843

When we select Binary Phase Modulation (BPM) for simultaneous transmission on 2 TX antennas and collect the raw data from RX chains, do we need to manually decode signals from individual TX antennas or is that done in the RF board's firmware?