AWR1642BOOST: AWR1843BOOST with DCA1000EVM

Julian Kapitel

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1843BOOST, DCA1000EVM

one more Question to the Setup; AWR1843BOOST with DCA1000EVM

we would like to collect RADAR row data in a test vehicle.

My Question; what kind of Software do we need (for the mentioned AWR1843BOOST with DCA1000EVM) to configure the Hardware (for example wave from etc.)? AND how much is it?

best regards, julian

over 5 years ago

0 Jitendra Gupta over 5 years ago

TI__Guru 69970 points

Hi Julian,

To control and capture the raw ADC from AWR1843BOOST using DCA1000EVM you can use mmWave Studio or mmWave SDK.

Please refer user guide of these tools/SW.

http://software-dl.ti.com/ra-processors/esd/MMWAVE-STUDIO/latest/index_FDS.html

http://software-dl.ti.com/ra-processors/esd/MMWAVE-SDK/latest/index_FDS.html

Regards,

Jitendra

0 Julian Kapitel over 5 years ago in reply to Jitendra Gupta

Prodigy 50 points

Hi Jitendra.

thx for the info.

and how much are the Softwares?

best regards, Julian.

0 Jitendra Gupta over 5 years ago in reply to Julian Kapitel

TI__Guru 69970 points

Hi Julian,

There is no cost for these software.

You need to buy the hardware only.

Regards,

Jitendra

Sensors

Sensors forum

AWR1642BOOST: AWR1843BOOST with DCA1000EVM