CCS/IWR6843AOPEVM: iwr6843aop ccdebug

Hello

Can you please let us know which one of these tickets help you with the resolution.

https://e2e.ti.com/support/sensors/f/1023/t/921882?IWR6843AOPEVM-Mmwave-Studio-IWR6843AOPEVM

https://e2e.ti.com/support/sensors/f/1023/t/850089

Thank you,

Vaibhav

Dear sir

follow the instruction

file:///C:/ti/mmwave_industrial_toolbox_4_5_0/labs/common/docs/software_setup/using_ccs_debug.html

Always fail to flash the ccdebug firmware xwr68xx_ccsdebug.bin with uniflash

But I can flash C:\ti\mmwave_industrial_toolbox_4_5_0\labs\people_counting\68xx_3D_people_counting\prebuilt_binaries\3D_people_count_68xx_demo.bin

with the same uniflash(ver.6.0.0) successfully

Is there something wrong with the firmware "xwr68xx_ccsdebug.bin" for the IWR6843AOPEVM ES2.0?

Thanks a lot!!

BR

KM

Hi,

You should be able to flash either binary. Are you using the EVM with the MMWAVEICBOOST? 

Can you try flashing in standalone mode without the MMWAVEICBOOST?

Regards,

Charles O

Hi,

I already try to flash xwr68xx_ccsdebug.bin firmware using uniflash with following two configuration:

1. EVM with the MMWAVEICBOOST

2. EVM standalone mode without MMWAVEICBOOST

I Still fail to flash the ccdebug firmware " xwr68xx_ccsdebug.bin"

always got the following uniflash message while the flash is halted

[INFO] Cortex_R4_0: Reading device version info... 

[INFO] Cortex_R4_0: ** 1 files specified for flashing.

Is it  possible that there is some compatible issue about the device version(IWR6843AOPEVM ES2.0) with the ccdebug firmware? 

Thanks!

BR

KM

Hi,

1. Can you share a picture of the EMM?

2. What is the EVM revision? 

        should be IWR6843AOPEVM ES2.0

3. What version of the SDK are you using?

       mmwave_sdk_03_05_00_04

Thanks!

BR

KM

Hi

Now I can flash ccdebug firmware to my IWR6843AOPEVM ES2.0 device

Thanks a lot!

BR

KM

Hi

What did you do differently?

Regards,

Charles O