• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 317 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642BOOST: raw data from the radar using only the AWR1642

Dong Ba
Intellectual 1055 points
Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Hi Team,

The customer has a question about raw data from the radar using only the AWR1642. For details please refer to the document  attached. 

The customer has no access to E2E post, if it is convenient for you contact the customer directly, the customer email is listed in attached. Or feel free to post it here.

Thanks,

Eric

Synthetic Aperture Radar.docx

  • 0
    TI__Mastermind 31680 points

    Hello Eric,

    Currently, in order to get the raw ADC data out of the mmWave device, the customer would definitely need a DCA1000 board (or TSW1400).

    We have tried to address most of these concerns on our FAQ page (linked below) also, please ask them to take a look.

     

    Regards,

    Ishita