Sensors

Sensors forum

State Resolved
Locked Locked
Replies 4 replies
Answers 1 answer
Subscribers 30 subscribers
Views 274 views
Users 0 members are here

Support feedback

Options

Options

Related

TIDEP-01012: FOV

Yanni Li

Intellectual 1960 points

Part Number: TIDEP-01012

Hi team,
I have a question regarding the field of view in MIMO-mode. What is the field of view in elevation direction? It is mentioned in the document that the elevation angular resolution is 18°. Is it therefore correct that the field of view is therefore +/-9°?
Thank you very much.

over 4 years ago

0 Ishita Kochar over 4 years ago

TI__Mastermind 31680 points

Hello Yanni Li,

Please refer to a relevant thread answered by our expert below :

https://e2e.ti.com/support/sensors/f/sensors-forum/878800/ccs-awr1243-awr1243-cascade-mmwave-sensor-s-fov-and-angluar-resolution

Hope this helps.

Regards,

Ishita

0 Yanni Li over 4 years ago in reply to Ishita Kochar

TI__Intellectual 1960 points

Thank you for your help, but my customer thinks it does not indicate clearly what is the min/max elevation angle.

Could you please clarify?

+1 Ishita Kochar over 4 years ago in reply to Yanni Li

TI__Mastermind 31680 points

Hello Yanni Li,

Apologies for the delay. I was on leave due to local holidays.

Regarding your query, as mentioned in previously attached link, the FoV is a property defined by the antennas.

For the antennas used on our cascade EVM, the 6dB gain points in the elevation plane indicate to +- 20deg.

Hope this gets them started.

Regards,

Ishita

0 Yanni Li over 4 years ago in reply to Ishita Kochar

TI__Intellectual 1960 points

Thank you so much.