TS3A5018: Delay parameter consultation

Jasper Yao

Expert 6330 points

Part Number: TS3A5018

Hi team,

My customer want to know the time delay parameter between VCOM and NC, NO under below condition:

EN pin connect to ground, IN pin is controlled by default fixed level, and VCOM pin is connected to NC or NO.

Thanks and looking forward to your reply.

Regards,

Jasper

over 3 years ago

+1 Clemens Ladisch over 3 years ago

Guru 316920 points

See [FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?

+1 Rami Mooti1 over 3 years ago

TI__Mastermind 35528 points

Hey Jasper,

The time delay of a signal from VCOM to the NC/NO is called the propagation delay through the switch. While the switch itself will have some marginal contribution to the propagation delay, this will heavily depend on the loading condition. We have a great FAQ on this topic and how to approximate the value, which Clemens has also linked below

[FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?

Thanks!
Rame

0 Jasper Yao over 3 years ago in reply to Rami Mooti1

TI__Expert 6330 points

Hi Rami, Clemens，

Thanks for your reply.

Regards,

Jasper

Switches & multiplexers

Switches & multiplexers forum

TS3A5018: Delay parameter consultation