• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS5A3160: take TS5A3160 to replece SN74LVC1G3157DCKR

Josh Wang
Prodigy 100 points
Part Number: TS5A3160

Hi expert

We would like to take TS5A3160 to replece SN74LVC1G3157DCKR is there any limiation?

thanks

Josh

  • 0
    TI__Mastermind 27808 points

    Hey Josh,

    For the most part this should work. The only specs I would double check here are the VIH/VIL compatibility and the bandwidth. VIH shouldn't be an issue since the 3157 device required a VIH that is higher than the VIH min of the 3160. VIL however can technically be a little higher on the 3157 device, so if you're running you control pin low logic a little high, you may run into an issue. But I suspect that you are running it closer to 0V so it shouldn't be an issue.
    The Bandwidth would be reduce from ~325MHz to 100MHz if you move to the 3160, so as long as your application isn't above this, it should be fine.

    Thanks!
    Rami