TS5A9411: Propagation delay through the switch (tpd)

Colin Chen

Part Number: TS5A9411

Tool/software:

Dear Experts,

I noticed that the TS5A9411 specification does not include the data for Propagation delay through the switch (tpd). May I ask what the tpd for this chip is? Thank you

over 1 year ago

0 Clemens Ladisch over 1 year ago

Guru 317450 points

The propagation delay depends strongly on the test conditions, i.e., drive strength and capacitive load. Specifying a single value would not be useful.

0 Colin Chen over 1 year ago in reply to Clemens Ladisch

Intellectual 835 points

Hi Clemens,

Does TI have any testing data in this area, or how should I estimate this value？

0 Clemens Ladisch over 1 year ago in reply to Colin Chen

Guru 317450 points

See [FAQ] How do I Approximate Propagation Delay and Channel to Channel Skew in an Analog Switch/Multiplexer?

0 Nir Gilgur over 1 year ago

TI__Mastermind 18145 points

Hello Chen,

As Clemens mentioned, the tpd value is dependent on the RC load in the test conditions. Without any load tpd is approximately 1ps, which is the RC of the device.

For more information you can checkout our FAQ.

Thanks,

Nir

Switches & multiplexers

Switches & multiplexers forum

TS5A9411: Propagation delay through the switch (tpd)