Error connecting XDS510 with ccs v3.3

rohith mohan

Other Parts Discussed in Thread: CCSTUDIO

I am trying to establish a JTAG connection between XDS510 and DSK6713.

I configured the device as given in the manual, but I am getting the error

" Unable to find an appropriate registry key for "TMS320C62xx" Target driver: C:\CCStudio_v3.3MCU\drivers\sdgo6xusb.dvr "

when I run CCS 3.3.

Please help me to get this running.

Thank you.

over 14 years ago

BrandonAzbell over 14 years ago

TI__Guru 64500 points

Two things to make sure you have.

1) The drivers from the particular vendor for the XDS510 emulator tool from their web site.

2) Do you have the MCU only version of CCS installed? If so, this will not support the C6000 class of devices. You will need the Platinum version.

rohith mohan over 14 years ago in reply to BrandonAzbell

Prodigy 100 points

>Yes, I have installed the drivers on my comp. It is a Spectrum Digital product. I am able to verify the connection using SD Config too. It passed the test.

> I have the full version of CCS v 3.3. I have the platinum edition too.

Thank you.

Ki over 14 years ago in reply to rohith mohan

TI__Guru**** 465171 points

Which CCS SR (Service Release) do you have installed?

Did you install the components for C6000? I ask because I see your install directory is "C:\CCStudio_v3.3MCU\" which leads me to believe you only installed MCU components.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Error connecting XDS510 with ccs v3.3