CCS Uniflash (3.4.1.00012) locks up

Hi Joe,

I'm working with engineering to see what potential root causes may be. 

What device are you working with?

Thanks

ki

Thank you, Ki!

It is an LM1 Linux device (tech doc attached). But, the device doesn't really figure in to the problem yet as I can't even launch Uniflash to attempt anything.

LM1AndroidToLinuxMigration 08092022.docx

Thanks. I see you are using an AM335x based device. Hence why you have to use UniFlash 3.x

Hello, Ki. Just checking to see if you need any additional information for me. Thanks.

Sorry, I am still waiting for an update.

What host OS are you running UniFlash 3.4 on?

I have also tried it on this machine, with same result on first-run. 

Can you try opening a DOS command window and then browse to:

<UNIFLASH 3 INSTALL DIR>\eclipse

and the run the uniflash.exe the directory from the command window? Do any error messages occur?

same result

Thanks fro trying. We are still investigating. Please note that UniFlash 3.x is very old and deprecated in support. Hence why the delay. Sorry for the inconvenience. 

No worries - thank you for your help!

Just a quick (non) update that we are still investigating. Thanks for your patience.

ki

I received some suggestions for UniFlash engineering:

Try enableing RCP logging:

https://software-dl.ti.com/ccs/esd/uniflash/docs/v3_4/uniflash-v3_quick_start_guide.html#generate-rcp-log

I think it is missing the dash, so it should be the following instead:

-DDebugPrintlnFlag=16

-DDebugLogPath=c:\temp

--

Another thing to try is to disable internet access before starting UniFlash, in case it is getting hung up on some blocked network call.

--

Lastly, try installing Process Monitor (https://learn.microsoft.com/en-us/sysinternals/downloads/procmon), and generate the logs to see if there is any error logs for accessing files. 

Hi, KI. Sorry for the delay on this. I will post an update later today. Thanks.