Crash with L1D access enabled on Collect code coverage Profile Setup properties

Maria Rodriguez88106

Hi,

I am running some simulations using CCSv4 and a C64x+ Megamodule cycle-accurate simulatior, little endian, as target configuration.

I had a crash of CCS when enabling the "L1D access" on Collect code coverage and exclusive profile data properties

Regards,

Maria

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 473351 points

Hello Maria,

What is the full version number of your CCS installation? I can't seem to reproduce this issue with 4.2.4. Could you also provide a test case (*.out file)?

Thanks

0 Maria Rodriguez88106 over 14 years ago in reply to Ki

Prodigy 70 points

Hi Ki,

Well, on "about Code Composer studio" it says version 4.2.4.00033. And here is the test case.

0412.Reversal.zip

0 Ki over 14 years ago in reply to Maria Rodriguez88106

TI__Guru**** 473351 points

Thanks. I used the same simulator and same version of CCSv4 but still do not see the error. I would suggest looking at some of the suggestions in the troubleshooting guide.

http://processors.wiki.ti.com/index.php/Troubleshooting_CCS

if those do not help, please attach a zip of the diagnostic logs mentioned below:

http://processors.wiki.ti.com/index.php/Troubleshooting_CCS#CCS_Diagnostic_Logs

Thanks