• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 53 subscribers
  • Views 813 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Code Composer 5.2 vs 5.1

Joshua Einstein
Intellectual 700 points

I just upgraded, and now I'm being told that my code is exceeding a code size limit, while before it wasn't. I noticed that the compiler is different, the file format is different, and seemingly quite a bit about the backend.

Has anyone else run into this issue with 5.2? What's going on??

  • 0
    TI__Guru**** 450031 points

    Hello,

    Did you update your 5.1 install to 5.2? Or did you do a full 5.2 install? Sounds like you are using MSP430 and 5.2 is using the code size limited linker.

    ki

  • 0 in reply to Ki
    TI__Guru*** 130875 points

    Hi Joshua,

    what type of license were you using/do you have?  How did you upgrade?  what exact versions did you go between?  

    Best regards,
    Lisa

  • 0 in reply to Lisa TI
    Intellectual 700 points

    I did an upgrade of 5.1 over 5.2. Looking closer at everything, it looks as if I was running on an evaluation copy that might have just expired. I'm going to hold off on looking at this until after this project heads out and need to make sure I'm working with a full license.

    Thanks