Code Composer 5.2 vs 5.1

Joshua Einstein

I just upgraded, and now I'm being told that my code is exceeding a code size limit, while before it wasn't. I noticed that the compiler is different, the file format is different, and seemingly quite a bit about the backend.

Has anyone else run into this issue with 5.2? What's going on??

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 450031 points

Hello,

Did you update your 5.1 install to 5.2? Or did you do a full 5.2 install? Sounds like you are using MSP430 and 5.2 is using the code size limited linker.

0 Lisa TI over 13 years ago in reply to Ki

TI__Guru*** 130875 points

Hi Joshua,

what type of license were you using/do you have? How did you upgrade? what exact versions did you go between?

Best regards,
Lisa

0 Joshua Einstein over 13 years ago in reply to Lisa TI

Intellectual 700 points

I did an upgrade of 5.1 over 5.2. Looking closer at everything, it looks as if I was running on an evaluation copy that might have just expired. I'm going to hold off on looking at this until after this project heads out and need to make sure I'm working with a full license.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Code Composer 5.2 vs 5.1