Does XDS510 PP PLUS supports the C6747 chip?

Jeremy13304

Intellectual 450 points

Other Parts Discussed in Thread: CCSTUDIO

I am wondering wheather the simulator XDS510 PP PLUS by spectrum digital corporation supports the DSP C6747?

i have downloaded the latest SD config 3.3.30, but there is no board with C6747 supported?

over 16 years ago

0 Mariana over 16 years ago

TI__Mastermind 24340 points

The XDS510PP+ does in fact work with the C6747 EVM; however, the spectrum driver package does not include a configuration for this specific board. Attached is the board configuration to test out. Just rename it to evmc6747_xds510pp.ccs. If you put at

C:\CCStudio_v3.3\drivers\import

It will show at Custom Boards at CCS Setup.

0 TimHarron over 16 years ago in reply to Mariana

TI__Mastermind 18130 points

You may have to first import the .ccs configuration file (File->Import...), but once you've done this it should indeed remain inside the Custom Boards tab within CCSetup.

0 Jeremy13304 over 16 years ago in reply to Mariana

Intellectual 450 points

3x for the attached file. It works perfect for my C6747 system with XDS510 PP PLUS simulator~!!

3x very much!!

0 GuyC over 16 years ago in reply to Jeremy13304

Prodigy 30 points

It seems to work for me too, but the "view-> registers" command doesn't list the embedded peripherals registers, just the core registers are shown. Is this a limitation of the emulator or is there a way to add them to the list?

0 Ki over 16 years ago in reply to GuyC

TI__Guru**** 482221 points

Hi Guy,

The peripheral register display is driven by device and module XML files.

This topic as more details if you are interested:

http://tiexpressdsp.com/index.php/Creating_Custom_Memory_Mapped_CCStudio_Register_Windows

Look at the section on using the Device XML file:

http://tiexpressdsp.com/index.php/Creating_Custom_Memory_Mapped_CCStudio_Register_Windows#Referencing_the_Device_XML_File

The *.ccs file posted in this thread does not use a Device XML file. Hence no peripheral registers. But I do see that a Device XML file exists for C6747. You can try rebuilding the configuration to use it.

Thanks

0 GuyC over 16 years ago in reply to Ki

Prodigy 30 points

Thanks for the pointers, that took care of it.

I attached the updated .ccs file. It also includes the diagnostic field for the emulator (if installed in the "C:\CCStudio_v3.3\specdig\sdconfig" default directory) to help diagnosing connection problems and the .GEL file link provided with the OMAPL-137 evaluation board under "C:\CCStudio_v3.3\boards\evmc6747_v1\gel".

Thanks again,

Guy C

0 AnonymousContent over 15 years ago in reply to Mariana

TI__Expert 4605 points

I want to connect CCSv3.3 to EVMOMAPL137 via XDS510-USB2.0 jtag emulator. but I can't find the "C6747 EVM XDS510USB EMULATOR " among available boards in CCS setup window.

Would you please send me the "C6747 EVM XDS510USB EMULATOR.ccs "or maybe some other useful files ?

0 AnonymousContent over 15 years ago in reply to Ki

TI__Expert 4605 points

Please reply me and help me if it is possible!

Thanks in advance.

Mazaheri.

0 Ki over 15 years ago in reply to AnonymousContent

TI__Guru**** 482221 points

Z Mazaheri said:

Hi

I want to connect CCSv3.3 to EVMOMAPL137 via XDS510-USB2.0 jtag emulator. but I can't find the "C6747 EVM XDS510USB EMULATOR " among available boards in CCS setup window.

Would you please send me the "C6747 EVM XDS510USB EMULATOR.ccs "or maybe some other useful files ?

This is a duplicate of: http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/71900.aspx

Code Composer Studio™︎

Code Composer Studio forum

Does XDS510 PP PLUS supports the C6747 chip?