• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 845 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

I wanted to know whether i can use CCS6 in Linux to burn code and to debug MSP430G2 Launchpad.

Nithin K Kurian
Prodigy 30 points
Other Parts Discussed in Thread: ENERGIA

 I am using Linux Mint 17 KDE 64 bit. And i installed CCS6 in it.

When am tring to debug "MSP430G2 Launchpad" gets an error message like this.

" Error initializing emulator: No USB FET was found "

And the fact is that i could be able to burn codes from " Energia "

Actually stuck at this point. Please help me.