CCS v4.1.0 and 4.1.1 Won't Connect with Piccolo 28035 Experimenters Kit Target

Geof Cohler

Hi,

The subject says it all. The Configuration will launch. But CCS will not connect to the target.

Any ideas?

Ki over 15 years ago

More details are needed to analyze the problem. Please read:

But my main question is if you are trying to use the on-board USB emulation.

Thanks

Geof Cohler over 15 years ago in reply to Ki

Hi,

I'm using onboard emulation. Here's what I do, and see the attached file for screen shots.

- connect board to laptop

- start CCS 4.1.0

- Create configuration

- Launch configuration

- Connect to Target -- failure

Please let me know what I'm missing here.

Thanks.

Geof

Board Plugged in.doc

Ki over 15 years ago in reply to Geof Cohler

Hi Geof,

Looks like you are running into the same issues in this thread:

Unfortunately this issue is not reproducible on our end. Would it be possible to send a Debug Server Log (see the last post from me)?

Please post any follow up posts on the other thread so we have everything in one thread.

Thanks

Joe G. over 15 years ago in reply to Ki

Ki,

If this helps any, this worked fine on my CCSv4.0.0.

But now does not work on my CCSv4.1.0.

But it does work on my CCS3.3.

All of these on the SAME laptop.

-Joe

Ki over 15 years ago in reply to Joe G.

Very strange. I got it to work on 4.1.1 and 4.1.2. But people in the other thread have complained that it does not work with 4.1.1.

Thanks for the info.

Code Composer Studio forum