Compiler/TDA2EG: code generate and makefile generate

It is possible to configure the CCS build to use a makefile you supply.  For details, please see the article Projects and Build Handbook for CCS.

Thanks and regards,

-George

how to make image file ,because i need to create own project make file and convert into image file

HI Geroge Mock,

i am using tda2xx board ,just i have created own make file using CCS software ,but i got below error when i try debug ,please suggest me how to clear this problem

CortexA15_0: GEL Output: --->>> AM571x Target Connect Sequence Begins ... <<<---
CortexA15_0: GEL Output: --->>> WARNING: UNKNOWN DEVICE ID (0x00000002), PLEASE UPDATE GEL FILES !!!! <<<---
CortexA15_0: GEL: Error while executing OnTargetConnect(): uninitialized GEL variable
at GEL_TextOut("\t--->>> AM571x PG%d.%d GP device <<<---\n", 0, 0, 0, 0, silicon_rev_major, silicon_rev_minor) [AM571x_startup_common.gel:106]
at AM571x_show_device_info() [AM571x_startup_common.gel:73]
at AM571x_target_connect_sequence() [AM571x_startup_common.gel:33]
at OnTargetConnect()
CortexA15_0: File Loader: Verification failed: Values at address 0x00000020 do not match Please verify target memory and memory map.
CortexA15_0: GEL: File: D:\kalai\development\GPIO_COM2\Debug\GPIO_COM2.out: a data verification error occurred, file load failed.
CortexA15_0: Unable to terminate memory download: NULL buffer pointer at 0x3aa4



thanks
kalaiventhan

Hi george ,

please reply my query

thanks
kalai

Kalai,

Your issue with connecting to TDA2xx board will be better answered in the device forum. I have split the thread and your question is now in the Automotive Processors forum here: https://e2e.ti.com/support/arm/automotive_processors/f/1021/t/602900