CCS/LAUNCHXL-CC2640R2: CCS Cloud DEBUG FAILS :"UNknown Module:DeviceDetector" on Project Zero for LAUNCHXL-CC2640R2

kodia raoul

Prodigy 200 points

Part Number: LAUNCHXL-CC2640R2

Tool/software: Code Composer Studio

CCS Cloud DEBUG FAILS :"UNknown Module:DeviceDetector" on Project Zero for LAUNCHXL-CC2640R2

I'm Building Project Zero for LAUNCHXL-CC2640R2 on CCS Cloud IDE.

But Anable to debug on the hardware . here is the response:

DEBUG FAILS :"UNknown Module:DeviceDetector"

over 8 years ago

0 JohnS over 8 years ago

TI__Guru**** 161500 points

I am attempting to reproduce this. When you say you are building project zero do you mean you are following the project zero instructions in SimpleLink Academy here:

Those instructions then point to the "empty" project here:

Is that the project you are working with?

Regards,

John

0 kodia raoul over 8 years ago in reply to JohnS

Prodigy 200 points

dev.ti.com/.../

the project is on this link

0 JohnS over 8 years ago in reply to kodia raoul

TI__Guru**** 161500 points

Thanks.

When I import that one I get these 2 projects.

I select the app one and click debug. It takes a while to build and then loads and runs ok.

That error you see "Unknown Module:DeviceDetector" is that showing up in the console or is it a pop up dialog box?

Regards,

John

0 JohnS over 8 years ago in reply to JohnS

TI__Guru**** 161500 points

I spoke with an expert and we have an idea of what is going on. To help us could you enable logging in the TI Cloud Agent.

To do that go to your user folder/TICloudAgent/
Then edit the ticloudagent.bat (if on windows, .sh if on Linux or Mac).
Add these 2 lines after the first line:
SET TI_DS_ENABLE_LOGGING=1
SET TI_DS_LOGGING_OUTPUT=c:\temp\agent.log

Close CCS Cloud
Start it again
Try to start the debugger again
Then go to the C:\temp folder and send us the agent_ticld.log file.

If you could do that we should be able to figure out what is going on.

Thanks,
John

0 JohnS over 8 years ago in reply to JohnS

TI__Guru**** 161500 points

I was able to reproduce this on Ubuntu 17.04. Are you running Linux?

If so the problem is a missing dependency, libudev

On my machine we were able to fix this issue by doing the following
sudo apt-get install libudev1
sudo ln -sf /lib/x86_64-linux-gnu/libudev.so.1 /lib/x86_64-linux-gnu/libudev.so.0
refresh the browser
then click on debug in CCS cloud

It should work now.

Regards,
John

0 kodia raoul over 8 years ago in reply to JohnS

Prodigy 200 points

YES, a popup

thanks

0 kodia raoul over 8 years ago in reply to JohnS

Prodigy 200 points

YES I'm using linux Debian jessie 64bit

0 kodia raoul over 8 years ago in reply to kodia raoul

Prodigy 200 points

Hi,
It 's Ok , the TICloudAgent has bean reinstalled. Your recent changes have disappeared .
it's now working on my launchpad On my linux .

Thank for help
Best regards
Raoul

0 kodia raoul over 8 years ago in reply to JohnS

Prodigy 200 points

Hi,
It 's Ok , the TICloudAgent has bean reinstalled. Your recent changes have disappeared .
it's now working on my launchpad On my linux .

Thank for help
Best regards
Raoul

0 kodia raoul over 8 years ago in reply to kodia raoul

Prodigy 200 points

how can i remove this comment ?

0 kodia raoul over 8 years ago in reply to kodia raoul

Prodigy 200 points

some comments are repeated , how can i remove a comment?

0 JohnS over 8 years ago in reply to kodia raoul

TI__Guru**** 161500 points

Don't worry about removing the duplicate posts. Looks like some of mine are duplicated as well. Must be some gremlins in E2E at the moment. Good to hear that things are working for you now. We are going to see if we can add something to the agent installer to address this dependency.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC2640R2: CCS Cloud DEBUG FAILS :"UNknown Module:DeviceDetector" on Project Zero for LAUNCHXL-CC2640R2