CCS/TMS320F28377S: How to

Samuel Junior

Tool/software: Code Composer Studio

I'm using the launchpad F28377S and I need to make a graphic interface to show the results. How can I export the data from DSP (CCS v7) to MatLab to build the interface? If it's not possible, there is any other way to do a graphic interface with this data?

over 8 years ago

0 JohnS over 8 years ago

TI__Guru**** 163035 points

Matlab would be an option. e2e.ti.com/.../484814

Another option depending on what it is you want to display would be to use GUI Composer. GUI Composer is typically use to provide a dashboard that displays what is going on within the device. i.e. at runtime vs post-processing data. GUI Composer can be accessed at dev.ti.com

Regards,
John

0 Samuel Junior over 8 years ago in reply to JohnS

Prodigy 20 points

Thanks for the answer, I'm using the GUI Composer v2 and CCS v7! Using the GC how can I take the data and save them to an archive? And is it possible make a data pos-processing in GC? If yes, how can I do it?

0 JohnS over 8 years ago in reply to Samuel Junior

TI__Guru**** 163035 points

Samuel,

There is a way to do custom data processing.

This tutorial video has some information on it: www.youtube.com/watch

Regards,
John

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28377S: How to