CCS/LAUNCHXL-F28027: rror connecting to the target: (Error -1135 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.

Gonzalo Fonseca

Part Number: LAUNCHXL-F28027

Tool/software: Code Composer Studio

Hello,

I can't run any project, when I debug it appears that problem, in the target configuration I select "Texas Instruments XDS100v1 Debug Probe", I checked the connections and the devices administrator and it looks ok.

over 7 years ago

0 desouza over 7 years ago

TI__Guru**** 169894 points

Hi,

The LAUNCHXL-F28027 uses a XDS100v2 probe, thus you should correct that to avoid any potential problems. Also, the error you are seeing is covered in the reference below:

software-dl.ti.com/.../ccsv7_debugging_jtag_connectivity_issues.html

Hope this helps,
Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-F28027: rror connecting to the target: (Error -1135 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation.