• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 53 subscribers
  • Views 553 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/CCSTUDIO-TM4X: CCS Debugger using Segger J-Link does not allow setting bit 1 of CONTROL register

CCS/CCSTUDIO-TM4X: CCS Debugger using Segger J-Link does not allow setting bit 1 of CONTROL register

Dave Hohl
Expert 2315 points

Part Number: CCSTUDIO-TM4X

Tool/software: Code Composer Studio

I am curious why the original thread at https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/673992/2503164#2503164 

  • 0
    TI__Guru**** 169894 points
    Dave,

    Your question seems truncated, but perhaps you are confused as to why it was locked. Threads are automatically locked after a period of time. I will unlock and post a reply.

    Unfortunately I haven't heard any news from Segger on both of your threads and I suspect they don't monitor the e2e forums; you might get a quicker reply if posting directly to their support line at support_jlink@segger.com

    Regards,
    Rafael
  • 0 in reply to desouza
    Expert 2315 points
    Thanks, Rafael. Not sure why the latter part of my post got truncated (perhaps something to do with pasting in the URL), but you are correct in your assumption. I will try to contact Segger directly, as you suggested.

    Regards,

    Dave