CCS/CC1310: Error connecting to the target: (Error -241 @ 0x0) A router subpath could not be accessed. A security error has probably occurred. Make sure your device is unlocked. (Emulation package 7.0.188.0)

Aurélien Fillau

Part Number: CC1310
Other Parts Discussed in Thread: UNIFLASH

Tool/software: Code Composer Studio

Hello,

I cannot flash my target anymore. I have already faced a message like that before but by doing a mass erase by using the online uniflash tool, i could recover my MCU for a while. But not i cannot found out a solution. My launchpad seems to be not recoverable :(

Regards,

Aurélien

over 7 years ago

0 Aurélien Fillau over 7 years ago

Expert 1710 points

I have the same error whether it is uniflash tool online/offline or code composer studio !

0 desouza over 7 years ago

TI__Guru**** 171104 points

Aurélien,

It seems you already tried what I would suggest: mass erase the device.

Since it is possible the device has become bricked, a few threads discuss this subject around on e2e. Two of them are shown below:
e2e.ti.com/.../606570
e2e.ti.com/.../634554

Hope this helps,
Rafael

0 Aurélien Fillau over 7 years ago in reply to desouza

Expert 1710 points

Thanks for the sharing, i will take a look at those threads :)

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC1310: Error connecting to the target: (Error -241 @ 0x0) A router subpath could not be accessed. A security error has probably occurred. Make sure your device is unlocked. (Emulation package 7.0.188.0)