CCS/CC2650: how to program the cc2650

user5303019

Part Number: CC2650
Other Parts Discussed in Thread: CC2640, BLE-STACK, CC2640R2F

Tool/software: Code Composer Studio

Hello,

I'm new in programming microcontroller, I need to know how can program the cc2650 with CCS? Is it true that i need to interface it with msp430 (for example) to program it?

please provide me an example code in CCS of programming the cc2650, for example to read a sensor's signal.

thanks

over 7 years ago

0 Eirik V over 7 years ago

TI__Guru 56590 points

Hello User,
The Launchpad has an onboard debug emulator (XDS110). All you need is CCS, USB cable and the launchpad. Please go through our simplelink academy training modules if you want to learn.

Download Simplelink Academy for CC2650/CC2640 here:
e2e.ti.com/.../448001

Download the matching BLE-STACK here
http://ti.com/ble-stack
PS: The older BLE-STACK-2-2-1 is here:
www.ti.com/.../BLE-STACK-ARCHIVE

Please use CCS 7.4 with the ble_sdk_2_02_02_25 release as described in the release notes (Dependencies):
http://processors.wiki.ti.com/index.php/Download_CCS#Code_Composer_Studio_Version_7_Downloads

For our newest devices (CC2640R2F and CC26x2) all the resources are available in resource explorer on dev.ti.com

0 user5303019 over 7 years ago in reply to Eirik V

Prodigy 40 points

thanks :)

0 Eirik V over 7 years ago in reply to user5303019

TI__Guru 56590 points

No problem:
Here is a nice overview for our latest BLE offering:
www.ti.com/.../overview.html

And here is a nice overview for BLE on the older CC2650/40:
e2e.ti.com/.../make-your-bluetooth-low-energy-solution-fast-simple-and-secure-with-new-bluetooth-4-2-certified-software

0 user5303019 over 7 years ago in reply to Eirik V

Prodigy 40 points

thanks Erik for your quick response,

I want to know how to proceed to interface msp430 with cc2650. For example, reading sensor using msp430 and transmitt data to cc2650 via spi.

thanks for advance

0 Eirik V over 7 years ago in reply to user5303019

TI__Guru 56590 points

Check out this:
processors.wiki.ti.com/.../SimpleAP+SNP

Or you can add SPI to simple_peripheral:
processors.wiki.ti.com/.../Cc2640_Adding_a_UART_or_SPI_driver_to_a_Sample_Project

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC2650: how to program the cc2650