Code Composer Studio™︎

Code Composer Studio forum

State Resolved
Locked Locked
Replies 5 replies
Answers 1 answer
Subscribers 54 subscribers
Views 536 views
Users 0 members are here

Support feedback

Options

Options

Related

CCS/AFE4404: Error linking files

Pooja Patil1

Prodigy 40 points

Part Number: AFE4404

Tool/software: Code Composer Studio

I downloaded the software given by Texas instrument on AFE4404EVM. I am trying to use the AFE4404 chip with MSP430 board. I created a new project and linked all the include files given in the folder.

Although I am getting errors for linking mainly. I am unable to connect to any of the included files.

It would be really helpful if someone could guide on this problem.

Thanks and Regards

Pooja Patil

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 473441 points

Hello Pooja,

This is a very common linker error. Please see:

https://e2e.ti.com/support/tools/ccs/f/81/t/796036?tisearch=e2e-sitesearch&keymatch=faq%3Atrue

thanks

ki

0 Pooja Patil1 over 6 years ago in reply to Ki

Prodigy 40 points

Hello,

I am still not able to fix the issues, I have linked the resources and I still get the same errors.

Please let me know what I can do exactly.

Thanks and Regards

Pooja

0 Ki over 6 years ago in reply to Pooja Patil1

TI__Guru**** 473441 points

Pooja Patil1 said:
I have linked the resources

How did you do this?

0 Pooja Patil1 over 6 years ago in reply to Pooja Patil1

Prodigy 40 points

As given in the photo, I created the path and the variable name. Then I added all the paths in the file search path in the MSP430 linker.

I also Tried to include files in an example project which I was able to build, but when I linked my files, I again got an error of unresolved symbols.

I have been trying to read all the forums and trying to search the way to link them, I am just not able to proceed with all the header files.

I would really appreciate your help.

Thanks and Regards

Poojs Patil

0 Ki over 6 years ago in reply to Pooja Patil1

TI__Guru**** 473441 points

Pooja Patil1 said:
As given in the photo, I created the path and the variable name. Then I added all the paths in the file search path in the MSP430 linker.

In your screenshot, I see that you created a build variable that specifies a path.

That will not do anything to help with the "unresolved symbols" error.

Pooja Patil1 said:
I also Tried to include files in an example project which I was able to build, but when I linked my files, I again got an error of unresolved symbols.

the issue is not missing header files. The issue is the missing object files.

You are basically running into the same issue as the user in the thread below:

https://e2e.ti.com/support/tools/ccs/f/81/t/856434

Please see my post on the second page:

https://e2e.ti.com/support/tools/ccs/f/81/p/856434/3171000#3171000

Thanks

ki