CCS/CODECOMPOSER: CCS

Sourav Ghosh1

Tool/software: Code Composer Studio

I have used a sine signal in simulink. Now I want to see the wave in the graph of code composer studio. In the 'expression' window (inside CCS), I can see the changing values but I am unable to see graph. How to see?

over 6 years ago

0 Ki over 6 years ago

TI__Guru**** 480241 points

Hello Sourav,

Please refer to section 7.7 of the CCS User's Guide:

https://software-dl.ti.com/ccs/esd/documents/users_guide/ccs_debug-graphs.html

Thanks

0 Sourav Ghosh1 over 6 years ago in reply to Ki

Prodigy 90 points

Thanks for reply. But, these things I had checked already. My concern is: I have given a sinusoidal signal to a pin of dsp F28335. Now, I had used the ADC block in simulink and through buffer-unbuffer it is connected to a out port (in simulink only). Now I want to know whether the dsp is properly acquiring the sine signal or not. For that I need to see the graph (of actual given signal) in code composer studio. The graph tool i am using, but unable to see sine wave

0 Ki over 6 years ago in reply to Sourav Ghosh1

TI__Guru**** 480241 points

Sourav Ghosh1 said:
The graph tool i am using, but unable to see sine wave

Are you saying that the Graph view is simply blank? If so, you need to make sure your graph properties are correct. Check the start address value and other parameters.

Code Composer Studio™︎

Code Composer Studio forum

CCS/CODECOMPOSER: CCS