CCS/CC1352P: Running example code, current draw is ~12mA

Yvan Pearson

Part Number: CC1352P
Other Parts Discussed in Thread: ENERGYTRACE

Tool/software: Code Composer Studio

I'm the ZED_LIGHT example code and the current draw is quite high at ~12mA according to Energytrace. Is there some documentation on low power strategies available?

thanks,

over 5 years ago

0 Marlyn Rosales Castaneda20 over 5 years ago

TI__Mastermind 24680 points

Hi Yvan,

Here is an application report you might find useful: Z-Stack end device power consumption measurement with the SimpleLink wireless MCU family

Depending on the SDK version you are using you could also reference the Power Consumption section of the Z-Stack User's Guide

Best Regards,

Marlyn

0 Yvan Pearson over 5 years ago in reply to Marlyn Rosales Castaneda20

Intellectual 850 points

The documentation does not seem to be current with the latest SDK v3.40

The issue is not resolved, I did try using some of the recommended steps in the documentation:

Setting defines to

xBOARD_DISPLAY_USE_UART

Z_POWER_TEST

POWER_TEST_POLL_DATA

mean current draw ~1.6mA

0 Yvan Pearson over 5 years ago in reply to Yvan Pearson

Intellectual 850 points

e2e.ti.com/.../3239724

0 Yvan Pearson over 5 years ago in reply to Marlyn Rosales Castaneda20

Intellectual 850 points

n/a

Code Composer Studio™︎

Code Composer Studio forum

CCS/CC1352P: Running example code, current draw is ~12mA