• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 199 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCS/MSP432P401R: The XDS110 and MSPFET stopped working with CCS 9.3

CCS/MSP432P401R: MSP FET - OS X

miha
Intellectual 960 points

Part Number: MSP432P401R

Tool/software: Code Composer Studio

Hi,

This question is related to this thread:



I have tried everything to repair all the XDS110 that have been locked after the firmware upgrade with no success. To program my production HW I had to work with one old MAC with upgrades turned OFF(I didn't have time to reply to the original thread)

Can TI please point me out to a debugger that will work on OS X with Catalina ???
is MSP FET still the best option to program? It Will work with the latest OS X?

On Farnell the adapter is not available anymore...



Thank you for the help.

Miha

  • 0
    TI__Guru**** 171044 points

    Miha,

    Several XDS110 Debug Probes are in use by macOS users, therefore there is no inherent issue with the combination of tools chosen - thus I suspect the problem is localized. 

    I personally have a few Debug Probes running on Catalina 10.15.4 (both standalone and on Launchpads) on a MacBook Pro 2013 and do not see issues with them. Yet today I was replying to a few threads on this setup. 

    Could you update the questions I asked in the other thread? These should help try to isolate and get additional insights to isolate the issue.

    Regards,

    Rafael