CCS: Adding J-link Debugger to CCS

Arshiya Tabassum

Other Parts Discussed in Thread: SEGGER

Tool/software: Code Composer Studio

I am trying to add Segger J-link to debugger list in CCS following the steps in this link: https://wiki.segger.com/TI_Code_Composer_Studio

My CCS version: Version: 9.3.0.00012

When I click on check for updates, it is giving me a list of available updates but the one related to J-link is not found and I am getting this warning message :

Please help to resolve this issue, it is a time critical issue for me.

Thank you,

Arshiya Tabassum

over 5 years ago

0 Andy Peters over 5 years ago

Genius 3945 points

FWIW, I am getting the same error.

0 Ki over 5 years ago

TI__Guru**** 463901 points

Hello Arshiya,

I see the there are issues with multiple update sites, not just the SEGGER site. The error is one that has been reported before. Unfortunately we have never determined the root cause. Please see the below link for more details and suggestions to workaround:

https://e2e.ti.com/support/tools/ccs/f/81/t/745390

Also note that J-Link support comes with the CCS v9.3 installer. Hence you can re-run the installer over your existing installation and it should detect it and allow you to add components that you did not install the first time (like J-Link support).

Hope this helps