CCS/TMS320F28069M: Cannot connect to Target

Barbara Sammut

Tool/software: Code Composer Studio

I'm having an issue starting a debug session because it will not connect to target. This is the first time building and debugging, so the device has never connected. The errors are shown below:

I did a connectivity test and it failed.

Any help would be appreciated!

over 5 years ago

0 Ki over 5 years ago

TI__Guru**** 476051 points

Hello,

The link to your screenshot is broken. Can you repost it? If you continue to have issues, please see the below faq:

https://e2e.ti.com/support/tools/ccs/f/81/t/821597

Thanks

0 Ki over 5 years ago in reply to Ki

TI__Guru**** 476051 points

I see that you created a new thread with the screenshot.

https://e2e.ti.com/support/tools/ccs/f/81/t/964742

I will close this one and reply in the other thread.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320F28069M: Cannot connect to Target