Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 41 subscribers
  • Views 690 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] PSPICE-FOR-TI: How can I add all the PSpice for TI model libraries to the commercial version of PSpice/SPB/Orcad?

PSPICE-FOR-TI: add TI library models

Amy Luo
Expert 6895 points
Part Number: PSPICE-FOR-TI

Hi team,

One of our customers has PSPICE-FOR-TI installed but does not have TI models, I asked the customer to try to add by following the link below but did not find Capture and did not know how to launch the Capture.

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1127257/faq-pspice-for-ti-how-can-i-add-all-the-pspice-for-ti-model-libraries-to-the-commercial-version-of-pspice-spb-orcad?tisearch=e2e-sitesearch&keymatch=PSPICE-FOR-TI

Not sure if Capture refers to PSPICE-for-TI? The customer has opened the PSPICE-for-TI, but the right dialog does not have the “Add models” button. How to add TI models to PSPICE-for-TI for this customer's situation？

Best Regards,

Amy Luo