PSICE For TI

Tom Zarian

Hi,

In order for me to use PSPICE for TI, the FIPS needs to be disabled. My company administration is asking to get a documentation from vendor that specifies that FIPS must be disabled. Can you please send such a document. I need to upload it.

over 1 year ago

0 David Larkin over 1 year ago

TI__Mastermind 20460 points

Hi Tom,

I was going to point you to our FAQ, but the top level structure is missing. And it's Thanksgiving week, so coverage will be light.

Take a look at these and see if they help as work-around for the FIPS issue:

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1161827/install-pspice-for-ti-without-disabling-fips?tisearch=e2e-sitesearch&keymatch=faq%252525253Atrue%2525252520and%2525252520fips#

https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1228873/pspice-for-ti-pspice-non-fips-compliant-encryption?tisearch=e2e-sitesearch&keymatch=PSpice%20AND%20FIPS#

In the meantime, I'll search around for some kind of document or FAQ that clearly addresses this.

David

0 JC Zhu over 1 year ago in reply to David Larkin

TI__Mastermind 37640 points

FAQ:

[FAQ] PSPICE-FOR-TI: Install and Use PSpice for TI - Simulation, hardware & system design tools forum - Simulation, hardware & system design tools - TI E2E support forums