Importing TPS40057 pspice Transient Model into TINA9-TI

lee 84680

Other Parts Discussed in Thread: TPS40057, TINA-TI

I tried to import TPS40057 pspice Transient Model to TINA9-TI, but there is an error message as "Invalid device: $CDNENCSTART. Line:#45."

Can you please let me know how to fix it? Thanks.

over 13 years ago

0 Britt Brooks - Online Design Tools over 13 years ago

TI__Mastermind 41310 points

Soo,

The PSpice models for the TI Power products on the Web are encrypted and can only be used in PSpice version 15.7 or higher.

The model for the TPS40057 would have to be converted for TINA-TI. I will enter the conversion into our current modeling queue.

Britt

0 Nikhil Gupta (Product Folder Models) over 12 years ago

TI__Mastermind 39210 points

Hi Soo,

Please find attached the TINA models for TPS40057. They will also be uploaded to the product folder in a few days. Let me know if you have any questions.

6507.TPS40057_STARTUP.tsc

6888.TPS40057_FAST_STARTUP.tsc

Best regards,

0 lee 84680 over 12 years ago in reply to Nikhil Gupta (Product Folder Models)

Intellectual 320 points

Hi Nikhil,

Yes I downloaded and ran the models, both work so I will be able to analysis with the right model thanks to you.

Thank you so much for your support again.

Soo.

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Importing TPS40057 pspice Transient Model into TINA9-TI