• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 38 subscribers
  • Views 495 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to assign the load as source in webench online tool ?

Ramachandran Shanmugavel
Prodigy 20 points

Hi ,

  Please guide me to use the one output voltage as the input voltage of second level regulation in webench tool.

  • 0
    TI__Mastermind 41310 points

    Are you trying to design a multi-stage power supply or simply trying to design a power supply from a know input voltage? If you are trying to generate multiple output voltages from a single input, the WEBENCH® Power Architect is the tool you should use. If you are simply trying to generate a new output voltage from an exsiting input voltage, you should use the WEBENCH® Power Designer.

    Can you give us a little more detail about what you are trying to achieve? If you can share the input voltage, output voltage(s) and currents, we may be able to help further.

    Britt