TINATI simulation model /TPS54429

Tsukui Yusuke

Guru 21930 points

Other Parts Discussed in Thread: TPS54429

Hi ,

Could you us about the TPS54429 of simulation models.
Simulation soft-start time is different from the result that was calculated from the equation of the data sheet.
Please tell me the cause.

Best Regards,
Yusuke/Japan Disty

over 11 years ago

0 Britt Brooks - Online Design Tools over 11 years ago

TI__Mastermind 41310 points

Yusuke-san,

Please note the following from the reference design:

If you change the MODE value to 0, you will see the much slower Softstart. Make sure to set your simulation time appropriately if you change the parameter.

Britt

0 Tsukui Yusuke over 11 years ago in reply to Britt Brooks - Online Design Tools

Guru 21930 points

Hi Brooks,

Thank you for your a information.

Best Regards,
Yusuke/Japan Disty

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINATI simulation model /TPS54429