WEBENCH® Tools: webench coil designer

Zhenya Dong

Tool/software: WEBENCH® Design Tools

Hi, everybody, I am using TI Webench coil designer to design coils. Why everytime the exported PCB design file is the same as the first one? I have been troubled by this problem for several days. Hope someone can help me. Thank you very much.

over 7 years ago

0 Praveen Badiger over 7 years ago

TI__Expert 8365 points

Hi Zhenya,

We will soon get back to you on this query.

Thanks & Regards,
Praveen B

0 Pradeep Chawda over 7 years ago

TI__Intellectual 995 points

Hi Zhenya,

Can you provide specific details about PCB coil you are designing and exporting so that we can look in to the issue?

You can share any PCB design by clicking on share button in Coil Designer. You can also take a snapshot and share the PCB you are getting after export in a particular tool. This will help us find the issue and resolve it.

Regards,
Pradeep

0 Zhenya Dong over 7 years ago in reply to Pradeep Chawda

Prodigy 20 points

Hi Pradeep,

here is the link.

https://webench.ti.com/wb5/LDC/#/spirals?shape=Square&lcTanKCapacitance=1000&turns=12&layers=2&spaceBetweenTrace=4.02&traceWidth=4.02&copperThickness=1.000&dout=629.92&temperature=25&partno=Custom&voltage=1.8&x12=4.00

When you export the design second time after you have changed the parameters, you will see it is the same design.

Thank you very much.

Best Regards,

Dong Zhenya

0 Pradeep Chawda over 7 years ago in reply to Zhenya Dong

TI__Intellectual 995 points

Hi Zhenya,

Thanks for providing the testcase. The issue has been fixed.

Regards,
Pradeep

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

WEBENCH® Tools: webench coil designer