• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 838 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/LM2585: LM2585

DEEPAK ANCHAN
Prodigy 10 points
Part Number: LM2585


Tool/software: WEBENCH® Design Tools

Hey,

We would like to know the possibility of the availability of the above design in Webench since we found the above same design in one of the documents related to LM2585 which was provided by Texas Instruments. We tried searching for the design in your Webench but we couldn't find it. Please come up with a solution to our problem since its extremely important and essential for the simulation results related to our project.

Thank You.

Regards,

Deepak Anchan

  • 0
    TI__Expert 3320 points

    Hi Deepak,

    Could you please follow below steps to get the designs. Please let me know if this helps. 

    1. Click on server link : webench.ti.com/.../webench5.cgi

    2. Enter Input Condition: VinMin = 5, VinMax = 5, Vout1=12, Iout1= 0.15, Vout2 = 12, Iout2=0.15  and Check "Use advanced option". Click on "show recommended power management ICs"

    3. Search for LM2585 and click on open design as shown below. 

    I have created the same design with the input condition taken from application design snapshot you have shared.

    webench.ti.com/.../SDP.cgi

    Thanks & Regards,

    Bhushan