TINA/Spice/LM337: ERROR IN MACRO FILE

Aftab Ashraf Av

Part Number: LM337
Other Parts Discussed in Thread: TINA-TI

Tool/software: TINA-TI or Spice Models

While creating the new macro its showing some shape error. Downloaded the spice file from the ti website .There are two spicemodel available,i tried with both of them.Please help to rectify the error

over 6 years ago

0 Arpan Gupta over 6 years ago

TI__Expert 3140 points

Hi Aftab,

I tried and able to generate the symbol file. PFA the symbol file below.

LM337_N_TRANS.TSM

Thanks & Regards,

Arpan Gupta

0 Aftab Ashraf Av over 6 years ago in reply to Arpan Gupta

Prodigy 195 points

Its not working

0 Arpan Gupta over 6 years ago in reply to Aftab Ashraf Av

TI__Expert 3140 points

Hi Aftab,

Could you please explain what exactly the issue is? How are you using the symbol file (LM337_N_TRANS.TSM)?

Thanks & Regards,

Arpan Gupta

0 Herman Theodorus over 6 years ago in reply to Arpan Gupta

TI__Genius 9775 points

Hi Aftab,

Which version of TINA-TI software are you using?

Have you downloaded the most up-to-date version of TINA-TI software: http://www.ti.com/tool/TINA-TI

Herman

0 Aftab Ashraf Av over 6 years ago in reply to Herman Theodorus

Prodigy 195 points

HI Herman,

I think i am using the most up to date version {Version 9.3.200.277 SF-TI}.

Aftab

0 Herman Theodorus over 6 years ago in reply to Aftab Ashraf Av

TI__Genius 9775 points

Hi Aftab,

What is your operating system? Windows or LInux? and which version?

Can you make sure that you indeed you are using the most recent version by going to Help -> About.

As Arpan has confirmed, we didn't see any problem.

So if you are using Windows 7,8 or 10 and you are using the most recent version, unfortunately, not much we can do to help you since we didn't see same problem on our side.

Your next best path will be to contact DesigSoft (TINA Vendor) directly and see if they can assist you there.

Go to www.tina.com and then go to the support section

Herman

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

TINA/Spice/LM337: ERROR IN MACRO FILE