Texas Instruments (TI) Simulation, hardware & system design tools support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search through answers related to design tools & simulation, hardware kits & boards, and reference designs or ask technical support questions on everything from Webench® Power Designer to active filter design. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] TINA/Spice: How do I run a simulation in TINA-TI?

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models How do I run a simulation in TINA-TI?

  • [FAQ] TINA/Spice: How to Run PSpice and/or TINA-TI models provided by TI?

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models How to Run PSpice and/or TINA-TI models provided by TI?

  • [FAQ] TINA/Spice: How do I know if a model on TI.com is unencrypted?

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models How do I know if a model provided by Texas Instruments is encrypted or unencrypted?

  • [FAQ] TINA/Spice: Ground (GND) nodes in TI's spice models

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models I would like to use my model in a floating ground application such as a Buck device in inverting buck boost configuration. However the model does not seem to support this…

  • [FAQ] TINA/Spice: Finding models from Texas Instruments

    Other Parts Discussed in Thread: TINA-TI , OPA320 , CSD , TL431 , TPS2811 Tool/software: TINA-TI or Spice Models Where do I find various types of models provided by Texas Instruments (PSpice, TINA-TI, SIMPLIS, IBIS, IBIS-AMI, etc.)?

  • [FAQ] TINA/Spice: Differences between a Transient and an Average Model

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models I would like to know the differences between a Transient Model and an Average Model.

  • [FAQ] TINA/Spice: LDO unencrypted models not importing to other tools - zx subcircuit missing

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models Some of the LDO models that were recently released work fine in PSpice, but give a missing subcircuit warning when imported into other tools. How do I fix this?

  • [FAQ] TINA/Spice: Guidelines for requesting debug help for simulation models

    Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models There are many things that can cause the simulation to give unexpected results (which may or may not be a direct result of the model). As a general practice, please follow…

  • [FAQ] TINA/Spice/TPS61193: TINA-TI model

    Part Number: TPS61193 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Hi We are going to simulate TPS61193 with TINA-TI. However there is only PSPICE mode is available on the TI web site. Can we use this PSPICE…

View FAQ threads